THM Sentry Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Manufacturer: Convergence Instruments
Supported Language(s): LabVIEW
Supported Model(s): THM_Sentry V100 (T+M - T+H+M)
Model(s) Tested: THM_Sentry V100 (T+M - T+H+M)
Interface(s): USB-Serial
Firmware Revision(s) Tested: V1.00

Certified: No
NI Supported: No
Source Code Available: Yes

Driver Revision: 1.1
Original Release Date: 02/3/2010
Current Revision Date: 09/13/2010

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

VISA 4.5 or later

3. Known Issues

To report issues or provide feedback about this instrument driver, please send an email to instrument.drivers@ni.com.

4. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.

REV 1.0, 02/3/2010

Original release.

REV 1.1, 09/13/2010

- Modified so that a new version of LabVIEW could recompile the driver is necessary

Developed by Bruno Paillard